Saito FG-36 可使用的三葉槳 size
Hello 各位前輩小弟之前使用過FG-36搭配兩槳的經驗是
APC 18x8 8520rpm
APC 17x10 8200rpm
不知前輩是否有搭配過三葉槳的經驗可以分享一下
感恩!
回復 1樓 air8521 的帖子
To convert from 2 blades to 3 blades you want to decrease thetotal blade area and increase the angle of attack (or pitch) to
overcome the increased drag of the third blade.
The general rule is to DECREASE propeller diameter by 1-2”,
and INCREASE by 1-2” the propeller pitch. It is all right to keep
the same pitch when going from 2 blades to 3.
兩葉槳 長度-1 pitch+1 = 三葉槳的size
[ 本帖最後由 zon1102 於 2010年10月11日 02:02 PM 編輯 ] 原帖由 zon1102 於 2010年10月11日 02:01 PM 發表 http://www.rctw.net/images/common/back.gif
To convert from 2 blades to 3 blades you want to decrease the
total blade area and increase the angle of attack (or pitch) to
overcome the increased drag of the third blade.
The general rule is to DEC ...
Thanks, I knew this formular.
不同材質/功能的槳所產生的效果也不一樣 我的FG-36是用APC15.75X13的三槳..推力未測.但轉速8200RPM給你參考... 原帖由 a-hwa 於 2010年10月11日 04:11 PM 發表 http://www.rctw.net/images/common/back.gif
我的FG-36是用APC15.75X13的三槳..推力未測.但轉速8200RPM給你參考...
感謝分享 原帖由 air8521 於 2010年10月11日 11:10 PM 發表 http://www.rctw.net/images/common/back.gif
感謝分享
小吳....這樣編隊恐怕我要半速等你....哈哈哈....
頁:
[1]