|
|
發表於 2018年12月22日 07:18 PM
|
顯示全部樓層
win10 可以安裝 naza 的軟體,但 軟體啟動後,偵測不到 硬體,要再手動安裝 usb driver,否則無法辦識硬體.
一樣 在google 中搜尋解答:
Connecting DJI Driver to Windows 10 and NAZA-M V2 Software
FacebookMessengerTwitterPinterestBufferMore25
I purchased a new laptop recently and wanted the configuration software on the new laptop to make changes in the field. I never had any issues installing the software or the DJI Driver on my desktop or other systems I had previously owned. After installing the Naza-M Assistant Software v2.20, I installed the DJI Driver and plugged in the drone for the USB to pick up. Unfortunately, after numerous times trying to install the software, the computer didn’t pick up the new hardware or the fact that the DJI Phantom drone was powered up via USB.
After searching the Internet I found the issue and an easy way to fix the problem. You will need these files as mentioned above:
Naza-M Assistant Software v2.20
DJI Driver
Download all the files from the DJI Website
Step 1 – Install Naza-M Assistant Software v2.20
This is straightforward, follow the prompts and install the software to make the configurations for the DJI Phantom. Make sure the drone is not connected to the PC. Once installed, close the NAZA screen as it’s no longer needed for this fix.
Step 2 – DJI Driver Install
Start installing the driver from the zip file or EXE file. A popup box will appear to connect the MC, which is the Master Controller I assume. Connect the USB cable from the drone to the PC and power up the drone with the battery. Complete the installation and in my case it ended up showing an error message “DJI Drone not found, nothing to update” or similar.
Steps to Fix the DJI Driver so Windows 10 Recognises it
Keep the DJI Drone plugged in and powered on to the PC
Go to your Device Manager. In Windows 10 you can simply click on the Windows button and start typing “Device Manager”. This can also be found from the Control Panel of your computer
Look for the “Serial Ports” section. What you’re looking for is USB device inside this section. It will have a COM port number next to it. Mine had COM5 (USB Serial Device COM 5)
Right mouse button on the USB Serial Device and click on “Update Driver Software”
Then select “Browse My Computer for Driver Software“
Select “Let me pick from a list of device drivers on my computer”
Click the button “Have Disk” on the bottom right
Click on “Browse” and navigate to the DJI Driver Install path. It should be around this area: “C:\Program Files (x86)\DJI product\DJI Driver 2.02\source64\dji_vcom_driver11.inf”
Look for the Source64 (i.e. 64-Bit) folder and select file ending with .INF. Click OPEN on this file. File name is : dji_vcom_driver11.inf
The DJI Driver will now install correctly and once fully installed will display DJI USB Virtual COM
Once this is done, you can open the Naza-M Assistant Software and the DJI Driver will automatically be picked up and the values from your drone populated into the software correctly. You can now make changes via NAZA-M software.
|
|
樓主